
Material appearance reference
VN-SI-1098 hydrophobic fumed silica
VN-SI-1098 is PDMS-treated hydrophobic fumed silica for thickening, thixotropy and reinforcement in silicone rubber, coatings, adhesives and sealants.
| Catalog code | VN-SI-1098 |
|---|---|
| Type | Hydrophobic fumed silica |
| CAS number | 112945-52-5 |
| Similar to | AEROSIL R 202 |
Contact VECNORA for product information and quotations.
Features
- Rheology control for liquid systems
Applications
- Coatings and paints
- Printing inks
- Rubber and elastomers
- Adhesives
- Sealants
- Lubricants
- Cable compounds
Technical reference data
| Surface treatment | PDMS |
|---|---|
| Typical BET specific surface area | 110 ± 30 m²/g |
| pH, 4% dispersion in water/ethanol (1:1) | 4.0–7.0 |
| Loss on drying, 105°C for 2 h | ≤1.5% |
| Silica content on ignited material | ≥99.8% |
| Tapped density after drying at 105°C for 2 h | 40–60 g/dm³ |
| Carbon content after drying at 105°C for 2 h | 4.0–7.0% |
| Loss on ignition, 1000°C for 2 h; sample pre-dried at 105°C for 2 h | ≤10.0% |
Surface treatment
The hydrophobic surface is produced by treating hydrophilic fumed silica with PDMS (polydimethylsiloxane). The starting hydrophilic silica has a specific surface area of 200 m²/g; the treated product has the typical BET value shown in the technical data.
Features
Provides thickening and thixotropy, anti-sagging behavior and stability in epoxy resins, and reinforcement in silicone rubber.
Controls the rheology of complex liquid systems and is suitable for transparent products. In powder coatings, it helps maintain free flow, limits caking and increases hydrophobicity.
Applications
Applications include silicone rubber, adhesives and sealants, coatings and printing inks, powder coatings, greases and cable gels.
Discuss your material requirements
Contact us about this product, samples or a quotation.
Contact Us