Material guide
Silicone fluids and emulsions
Compare amino silicone fluids, PDMS emulsion and amino silicone emulsion by composition, viscosity, solids and documented applications.
This selection brings together amino silicone fluids VN-SI-1254 and VN-SI-1257, PDMS emulsion VN-SI-1131 and amino silicone emulsion VN-SI-1134. The fluid and emulsion forms have different specifications.
Textile and fiber processing is listed for both amino fluids. VN-SI-1257 also lists rubber applications and low yellowing. VN-SI-1131 is a non-ionic PDMS emulsion with slip and wear-resistance features; VN-SI-1134 lists coating, hair-care, textile and automotive applications.
What to check when selecting
- First choose the required fluid or emulsion form and check the listed composition and dilution information.
- Compare viscosity only with its temperature and units; distinguish active content from solid content.
- Review amine-number units carefully: the two amino-fluid tables use different labels, so confirm the test basis before comparison.
Explore the products
Amino silicone fluid
Amino silicone fluid for textile and fiber processing: typical viscosity 800-5000 cSt at 25°C and active content more than 95%.
- CAS number
- 188627-10-3
Amino silicone fluid
Aminoalkyl and alkoxy modified PDMS for textile and rubber applications. Typical viscosity around 3500 cSt at 25°C; amine number 0.8 meq/g.
- CAS number
- 192888-42-9
PDMS emulsion
Nonionic polydimethylsiloxane emulsion with typical solid content around 80% and water as the listed diluent. Review form and selection questions.
- Composition
- PDMS
Amino silicone emulsion
Cationic amino silicone microemulsion: typical solids more than 35%, pH 5.0-7.0 and viscosity 500 cSt at 25°C. Compare silicone emulsions.
View product detailsSelection questions
Which product lists water as a suitable diluent?
The VN-SI-1131 technical table lists water as the suitable diluent. Confirm the dilution method and stability under your intended process conditions.
Can a fluid replace an emulsion at the same dosage?
The available data do not establish an equal-dose substitution. Compare composition, active or solid content, and formulation compatibility before testing a replacement.
Discuss your material requirements
Share the product model, application and required properties. Ask for current TDS, SDS and sample information for the grade you are considering.
Contact Us