
Material appearance reference
VN-SI-1100 hydrophobic fumed silica
VN-SI-1100 is DDS-treated hydrophobic fumed silica for thickening and reinforcing RTV silicone sealants and controlling liquid-system rheology.
| Catalog code | VN-SI-1100 |
|---|---|
| Type | Hydrophobic fumed silica |
| CAS number | 68611-44-9 |
| Similar to | AEROSIL R 974 |
Contact VECNORA for product information and quotations.
Features
- Water repellency in liquid systems
- Rheology control for liquid systems
Applications
- Coatings and paints
- Printing inks
- Rubber and elastomers
- Adhesives
- Sealants
Technical reference data
| Surface treatment | DDS |
|---|---|
| Typical BET specific surface area | 170 ± 30 m²/g |
| pH, 4% dispersion in water/ethanol (1:1) | 3.7–4.5 |
| Loss on drying, 105°C for 2 h | ≤0.7% |
| Silica content on ignited material | ≥99.8% |
| Tapped density after drying at 105°C for 2 h | 40–60 g/dm³ |
| Carbon content after drying at 105°C for 2 h | 0.8–1.6% |
| Loss on ignition, 1000°C for 2 h; sample pre-dried at 105°C for 2 h | ≤2.5% |
Surface treatment
The hydrophobic surface is produced by treating hydrophilic fumed silica with DDS (dimethyldichlorosilane). The starting hydrophilic silica has a specific surface area of 200 m²/g; the treated product has the typical BET value shown in the technical data.
Features
Acts as a hydrophobic thickening and reinforcing component in RTV silicone sealants and helps improve their storage life. It improves water resistance and hydrophobicity in liquid systems and controls the rheology of complex liquids.
In powders, it improves and maintains free flow and anticaking performance.
Formulation uses
It is used in RTV silicone rubber, especially electrical formulations, as well as adhesives, sealants, coatings, printing inks and powder coatings.
Discuss your material requirements
Contact us about this product, samples or a quotation.
Contact Us