
Material appearance reference
VN-SI-1101 hydrophobic fumed silica
VN-SI-1101 is HMDS-treated hydrophobic fumed silica for reinforcing HTV and liquid silicone rubber and controlling rheology in liquid systems.
| Catalog code | VN-SI-1101 |
|---|---|
| Type | Hydrophobic fumed silica |
| CAS number | 68909-20-6 |
Contact VECNORA for product information and quotations.
Features
- Water repellency in liquid systems
- Rheology control for liquid systems
Applications
- Coatings and paints
- Printing inks
- Rubber and elastomers
- Adhesives
- Sealants
Product description
Its typical BET surface area is 170 ± 30 m²/g. The hydrophobic surface improves water resistance, while fine particles and good dispersion support performance in defoamer formulations. In powders, it helps maintain free flow and reduce caking.
Technical reference data
| Surface treatment | HMDS |
|---|---|
| Typical BET specific surface area | 170 ± 30 m²/g |
| pH, 4% dispersion in water/ethanol (1:1) | 6.0–9.0 |
| Loss on drying, 105°C for 2 h | ≤0.7% |
| Silica content on ignited material | ≥99.8% |
| Tapped density after drying at 105°C for 2 h | 40–60 g/dm³ |
| Carbon content after drying at 105°C for 2 h | 1.5–2.5% |
| Loss on ignition, 1000°C for 2 h; sample pre-dried at 105°C for 2 h | ≤4.0% |
Elastomers and formulated products
It is used in HTV silicone rubber and liquid silicone rubber, as well as adhesives, sealants, coatings, printing inks and powder coatings.
Material characteristics
The hydrophobic surface is produced by chemically treating hydrophilic fumed silica with hexamethyldisilazane (HMDS). The starting hydrophilic silica has a specific surface area of 200 m²/g; the typical BET value for the treated product is listed separately in the technical data.
Discuss your material requirements
Contact us about this product, samples or a quotation.
Contact Us