
Material appearance reference
VN-SI-1102 hydrophobic fumed silica
VN-SI-1102 is HMDS-treated hydrophobic fumed silica for silicone-rubber reinforcement, defoamers, coatings, printing inks and toner.
| Catalog code | VN-SI-1102 |
|---|---|
| Type | Hydrophobic fumed silica |
| CAS number | 68909-20-6 |
| Similar to | AEROSIL R 812 |
Contact VECNORA for product information and quotations.
Features
- Water repellency in liquid systems
- Rheology control for liquid systems
Applications
- Coatings and paints
- Printing inks
- Rubber and elastomers
- Foam control
Product description
The typical BET surface area is 300 ± 30 m²/g. It reinforces HTV and liquid silicone rubber, improves water resistance and controls the rheology of complex liquids. Fine particle size and dispersibility support its use in defoamers.
Technical reference data
| Surface treatment | HMDS |
|---|---|
| Typical BET specific surface area | 300 ± 30 m²/g |
| pH, 4% dispersion in water/ethanol (1:1) | 6.0–9.0 |
| Loss on drying, 105°C for 2 h | ≤0.7% |
| Silica content on ignited material | ≥99.8% |
| Tapped density after drying at 105°C for 2 h | 40–60 g/dm³ |
| Carbon content after drying at 105°C for 2 h | 2.5–4.0% |
| Loss on ignition, 1000°C for 2 h; sample pre-dried at 105°C for 2 h | ≤5.0% |
Powder flow
In powder systems, including printer toner, it helps improve and maintain free flow and anticaking properties.
Material characteristics
The hydrophobic surface is obtained by HMDS post-treatment of hydrophilic fumed silica. The hydrophilic starting material has a specific surface area of 400 m²/g, distinct from the typical BET value of the finished treated grade.
Discuss your material requirements
Contact us about this product, samples or a quotation.
Contact Us