Silicones · Fluorochemicals · Specialty additives
EN
VN-SI-1139 General-use Fluorosilicone compound — Material appearance reference

Material appearance reference

Silicones

VN-SI-1139 General-use Fluorosilicone compound

VN-SI-1139 is a general-purpose fluorosilicone compound based on fluorosilicone gum, fillers and additives.

Product information
Catalog codeVN-SI-1139
Chemical namefluorosilicone compound

Contact VECNORA for product information and quotations.

Features

  • Oil and solvent resistance
  • High and low temperature resistance

Technical reference data

Measured hardness options, Shore A (ASTM D2240)38 / 60 / 70
Tensile strength for the above options, MPa (ASTM D412)10 / 9.0 / 8.0
Elongation at break for the above options, % (ASTM D412)510 / 300 / 260
Tear strength for the above options, kN/m (ASTM D624-B)28 / 26 / 17
Compression set, 177°C, 22 h, % (ASTM D395; same option order)13 / 16 / 18
Specimen curing conditionsPeroxide cure: press cure 170°C × 15 min; post-cure 200°C × 4 h
Specific gravity, ASTM D792 (38 / 60 / 70 Shore A options)1.44 / 1.48 / 1.49
Fuel C volume change, ASTM D471, 25°C / 72 h, % (38 / 60 / 70 Shore A options)+25 / +25 / +22
AppearancePale yellow, smooth surface, free of visible impurities

Applications and use

The compound resists oils and solvents and supports both high- and low-temperature service. Organic peroxides can be used for vulcanization. The curing procedure depends on the processing method and the dimensions of the molded part.

Discuss your material requirements

Contact us about this product, samples or a quotation.

Contact Us
Contact Us