
VN-SI-1148 Silicone Hydrophobic Emulsion
VN-SI-1148 is a solvent-free silane/siloxane emulsion for mineral-surface impregnation, primers and waterborne coating additives.
| Catalog code | VN-SI-1148 |
|---|---|
| Active ingredient | silane & siloxane |
| Type | silicone emulsion |
| Similar to | Wacker BS1306 |
Contact VECNORA for product information and quotations.
Features
- Substrate penetration
Applications
- Gypsum and plaster
- Coatings and paints
Technical reference data
| Appearance | Milky white liquid |
|---|---|
| Active content, % | Approximately 50 |
| Density, g/cm³ | 0.95 |
| pH at 20°C | 6–7 |
Applications and use
Clean and dry the surface, dilute 5–15 times with water, then brush or spray twice. For aqueous coatings use 1–5 wt.% after a small trial. Suitable for silicone-resin or silicate paints and plasters, whitewash emulsions, interior paints and acrylic facade primers.
Performance and compatibility
The stabilized silane/siloxane mixture penetrates the substrate and hydrolyzes after application, converting the emulsion into a silicone-resin hydrophobic film. It reduces capillary absorption without clogging pores or capillaries, so the building material remains breathable. The emulsion combines alkali resistance, paint adhesion and storage stability even after dilution, and is described as a low-VOC formulation.
Discuss your material requirements
Contact us about this product, samples or a quotation.
Contact Us