Silicones · Fluorochemicals · Specialty additives
EN
VN-SI-1152 Solvent-free silicone concentrate

Silicones

VN-SI-1152 Solvent-free silicone concentrate

VN-SI-1152 is a solvent-free silane/siloxane concentrate for water and stain repellency with color enhancement on natural stone and tile.

Product information
Catalog codeVN-SI-1152
Active ingredientSilane,siloxane
TypeSilane-siloxane concentrate
Similar toWacker Silres BS30

Contact VECNORA for product information and quotations.

Applications

  • Coatings and paints
  • Construction materials

Typical technical data

ItemsValue
AppearanceColorless to transparent liquid
Viscosity, cSt, 25℃Around 15
Density, g/cm31.03

Material characteristics

Apply the concentrate undiluted to mineral substrates to improve water and stain repellency and enhance their appearance. It is suitable for tumbled marble, limestone, slate and Saltillo clay tile. The treatment forms a protective layer while preserving water-vapor permeability, allowing the stone or tile to remain breathable. Oil- and water-based stains are easier to remove from the treated surface, for example by wiping with a tissue.

Protection and finish

Once hardened, the treatment is UV-stable and provides water repellency. It helps reduce cracking, spalling, freeze–thaw damage and chemical deterioration. The vapor-permeable coating resists cracking, peeling and blistering. Depending on the application method, the finish may be matte or glossy; a single coat can be sufficient, with further coats used to adjust the appearance. The concentrate can be diluted with solvent and has good storage stability, including freeze–thaw stability.

Substrate cleaning methods

Choose surface preparation according to the substrate type, location, soundness, age, curing and finishing history, contamination, existing coatings and the required result. Thoroughly remove dust, dirt, oil, grease, curing compounds, old coating residues, efflorescence and laitance. Compatible methods include abrasive blasting with sand, baking soda or vacuum recovery; chemical cleaning by acid etching, stripping, solvent degreasing, caustic or alkaline-soap scrubbing; high-pressure washing, with or without sand; and suitable heat cleaning using propane or acetylene. If strong acid or caustic cleaners are used, neutralize the surface and rinse away residues. Obtain customer approval of a test patch before extensive preparation.

Application instructions

Apply directly from the container with a soft lint-free cloth, sponge or brush. Use 1–2 coats for standard color and appearance enhancement, or 2–3 coats for a high-gloss enhanced finish. Remove excess material to prevent an uneven appearance. Full cure takes 24 hours. Before treating the complete area, obtain approval of a final test patch to confirm the desired appearance. Treated substrates are generally recoatable with solventborne coatings, but a customer-approved compatibility and appearance test patch is required before full application.

Discuss your material requirements

Contact us about this product, samples or a quotation.

Contact Us
Contact Us