
VN-SI-1190 Super Spreader
VN-SI-1190 is a low-foaming trisiloxane-ethoxylate super-spreader with a low pour point for agricultural spray formulations.
| Catalog code | VN-SI-1190 |
|---|---|
| Type | water-soluble |
| Similar to | Silwet 806 |
Contact VECNORA for product information and quotations.
Features
- Low foaming
Applications
- Agricultural formulations
Technical reference data
| Appearance | Colorless to amber transparent liquid |
|---|---|
| Viscosity at 25°C, mm²/s | 25–45 |
| Active content, % | 100 |
| Surface tension, mN/m (0.1 wt.%) | 21 |
| Density, g/cm³ (typical) | 1.01–1.03 |
| Cloud point, °C (1 wt.%) | <10 |
Applications and use
At 0.1 wt.% it gives aqueous surface tension below 22 mN/m, reducing leaf contact angle and increasing spray coverage and helping promote agrochemical absorption. For tank mixing, dissolve the pesticide, mix with 80% of the water, add the adjuvant, then add the remaining water and mix. A small-orifice nozzle is suitable for spraying.
Formulation and trial conditions
For agrochemical concentrates use 0.5–8%, at pH 6–8. Compatibility and stepwise application trials are required to set the final dose. Trial settings for reduced-volume spraying are water at 1/2–2/3 and pesticide at 70–80% of the usual amount; establish suitability for the actual pesticide and formulation before adopting these settings.
Application-specific use levels
Typical spray-liquid addition levels by weight: plant growth regulators 0.025–0.05%; herbicides 0.025–0.15%; pesticides 0.025–0.1%; antimicrobial agrochemicals 0.015–0.05%; fertilizers and trace elements 0.015–0.1%.
Discuss your material requirements
Contact us about this product, samples or a quotation.
Contact Us