Silicones · Fluorochemicals · Specialty additives
EN
VN-SI-1279 General-purpose liquid silicone rubber (LSR)

Silicones

VN-SI-1279 General-purpose liquid silicone rubber (LSR)

VN-SI-1279 is a two-component general-purpose liquid silicone rubber for liquid injection molding.

Product information
Catalog codeVN-SI-1279
Processliquid injection molding

Contact VECNORA for product information and quotations.

Applications

  • Rubber and elastomers

Technical reference data

Hardness options, Shore A; 2 mm specimen, 105°C × 15 min30 / 45 / 55 / 60 / 65
Tensile strength, MPa; same option order and specimen conditions7.5 / 9.0 / 9.0 / 10.0 / 8.5
Elongation at break, %; same option order and specimen conditions800 / 650 / 650 / 550 / 450
AppearanceColorless, transparent liquid
Component A viscosity, mPa·s (typical); Shore A grades 30 / 45 / 55 / 60 / 6560 × 10⁴ / 70 × 10⁴ / 70 × 10⁴ / 75 × 10⁴ / 60 × 10⁴
Component B viscosity, mPa·s (typical); Shore A grades 30 / 45 / 55 / 60 / 6560 × 10⁴ / 70 × 10⁴ / 70 × 10⁴ / 75 × 10⁴ / 60 × 10⁴
Density, g/cm³ (typical); Shore A grades 30 / 45 / 55 / 60 / 651.110 / 1.120 / 1.120 / 1.125 / 1.125
Tear strength, N/m; same Shore A order; 2 mm specimen, 105°C for 15 min12000 / 25000 / 38000 / 30000 / 35000

Applications and use

The transparent rubber is used in molded articles, including soothers and feeding-device components. Mix A:B strictly at 1:1; recommended curing temperature is 120–150°C, with time set by process and part thickness. Prevent contamination by nitrogen-, phosphorus-, sulfur- or tin-containing materials that may inhibit curing.

Features and benefits

The transparent LSR is intended for efficient liquid injection molding with good physical properties. Process selection can reduce scrap and energy use; the actual result depends on the molded part and production process.

Discuss your material requirements

Contact us about this product, samples or a quotation.

Contact Us
Contact Us