Silicones · Fluorochemicals · Specialty additives
EN
VN-SI-1293 Silicone Release Agent

Silicones

VN-SI-1293 Silicone Release Agent

VN-SI-1293 is a 100%-active, solventless addition-curing silicone release system for glassine paper.

Product information
Catalog codeVN-SI-1293
TypeSolventless
Active content100%
Suitable substratePaper

Contact VECNORA for product information and quotations.

Applications

  • Coatings and paints
  • Paper processing

Typical technical data

TemperatureSubstrateCuring time
120℃Glassine12 seconds

Technical reference data

Reference release force with tesa 7475 tape at 23°C, g/25 mm; peel speed 0.3 m/min5–15

Applications and use

For 100 parts by weight of main polymer, mix in 2.8–3.2 parts by weight of its designated crosslinker until dispersed, then add 0.9–1.3 parts by weight of designated catalyst while mixing and homogenize. Never mix crosslinker and catalyst directly: a violent reaction can occur. Coat the substrate and heat cure. Typical bath life is about 5 hours at 40°C and depends on formulation, equipment, mixing and environment.

Packaging

Main polymer: 180 kg drums or 1000 kg IBC totes. Designated crosslinker and catalyst: each in 20 kg drums or 1 kg plastic pails.

Typical curing and release

On glassine, a typical curing result is 12 seconds at 120°C, defined by no smear, rub-off or coating migration. Typical release force is 5–15 g/25 mm using tesa 7475 tape at 23°C and 0.3 m/min peel speed. These are reference results; substrate, formulation and oven efficiency affect performance.

Features and benefits

The solventless system offers stable release, anchorage to a range of substrates and low silicone migration. It is suitable for different adhesive systems; long bath life supports coating operations.

Discuss your material requirements

Contact us about this product, samples or a quotation.

Contact Us
Contact Us