
VN-SI-1294 Silicone Release Agent
VN-SI-1294 is a 100%-active, solventless addition-curing silicone release system for PET film.
| Catalog code | VN-SI-1294 |
|---|---|
| Type | Solventless |
| Active content | 100% |
| Suitable substrate | PET film |
Contact VECNORA for product information and quotations.
Applications
- Coatings and paints
- Paper processing
- PET films
Typical technical data
| Temperature | Substrate | Curing time |
|---|---|---|
| 120℃ | Glassine | 12 seconds |
| 120℃ | PET | 15 seconds |
Technical reference data
| Reference release force with tesa 7475 tape at 23°C, g/25 mm; peel speed 0.3 m/min | 5–15 |
|---|
Applications and use
For 100 parts by weight of main polymer, disperse 1.8–3.0 parts by weight of its designated crosslinker, then add 1.3–2.0 parts by weight of designated catalyst under mixing and homogenize. Never mix crosslinker and catalyst directly because a violent reaction can occur. Apply and heat cure. Typical bath life is about 5 hours at 40°C, depending on formulation, equipment, mixing and environment.
Packaging
Main polymer: 180 kg drums or 1000 kg IBC totes. Designated crosslinker and catalyst: each in 20 kg drums or 1 kg plastic pails.
Typical curing and release
Typical curing results at 120°C are 15 seconds on PET and 12 seconds on glassine, defined by no smear, rub-off or coating migration. Typical release force is 5–15 g/25 mm with tesa 7475 tape at 23°C and a peel speed of 0.3 m/min. Results depend on formulation, substrate and oven efficiency.
Features and benefits
The solventless system offers stable release, anchorage to a range of substrates and low silicone migration. It is suitable for different adhesive systems; long bath life supports coating operations.
Discuss your material requirements
Contact us about this product, samples or a quotation.
Contact Us